When to Use Aluminum vs Stainless Steel

Stainless steel and aluminum are two of the most popular metals used for manufacturing. Widely used for their versatility and corrosion resistance, aluminum and stainless steel are staples in the metals industry. To know when it is better to use aluminum vs stainless steel, we must compare factors like their compositions, mechanical properties, and cost.

Main Characteristics of Stainless-Steel vs Aluminum

Stainless Steel

• Contains a minimum of 11% chromium
• Is a ferrous alloy (contains iron)
• Usually magnetic
• High tensile strength

Stainless steel comes in a variety of grades. The grades are classified by a series number and assigned a numerical grade. The numbers classify the grades of steel based on their composition, physical properties, and applications. The most popular grades are 304 stainless steel and 316 stainless steel.

Aluminum

• Non-magnetic
• Low density
• Non-ferrous alloy (doesn’t contain iron)

Due to its low tensile strength, aluminum is commonly alloyed with other metals to give it a number of different superior properties. Some of the most common aluminum alloys are 3003 aluminum and 3004 aluminum.

Aluminum vs Stainless Steel: Which One Do I Use?

Both metals possess properties that are desirable for manufacturing a variety of products. However, the differences in their properties are a key factor when choosing which metal to use.

The Major Advantages of Each Metal

Aluminum Stainless Steel -Good Malleability

-High Ductility

-Good Conductivity

-Light Weight

-High Tensile Strength

-Heat Resistant

-Very Durable

-Low Maintenance

Aluminum vs Stainless Steel: Key Differences

Strength

Stainless steel is heavier and stronger than aluminum. In fact, aluminum is around 1/3 the weight of steel. Even though stainless steel is stronger, aluminum has a much better strength to weight ratio than stainless steel.

Conductivity

Steel is a poor conductor of electricity due to its dense protective oxide layer. On the other hand, aluminum is a very good electrical and thermal conductor.

Featured content:
Air Conditioning Industry Regulations
Key Questions to Ask When Ordering Custom Fan
Top Five Technologies Needed for a Spacecraft to Survive Deep Space

Cost

Aluminum is a more costly than stainless steel if you look at price based on weight. But, if you look at price by volume, Aluminum is more cost effective because you get more product.

Heat Resistance

When comparing stainless steel vs aluminum, stainless steel has much better resistance to heat with a melting point of 2500 ℉, while aluminum becomes very soft around 400 ℉ with a melting point of 1220 ℉. However, aluminum has the advantage over steel in cold temperatures. As the temperature decreases, the tensile strength of aluminum increases, while steel becomes brittle in low temperatures.

Corrosion Resistance

Aluminum does not rust; however, it does corrode when exposed to salt. Stainless steel is highly corrosion resistant and does not easily rust. In addition, stainless steel is non-porous which gives it more resistance to corrosion.

Composition

Composition of Major Stainless Steel Alloys

Alloy Grades %C %Mn %P %S %Si %Cr %Ni %Mo SS304 0.040 1.580 0.024 0.040 0.400 18.35 8.040 0.070 SS304L 0.010 1.638 0.023 0.002 0.412 18.56 8.138 0.364 SS316 0.080 2.000 0.045 0.030 1.000 16.80 11.20 2.500 SS316L 0.020 1.390 0.024 0.080 0.480 16.80 10.22 2.080

Composition of Major Aluminum Alloys

Alloy %Cu %Mg %Mn %Si %Zn 2024 4.4 1.5 0.6 0 0 6061 0 1 0 0.6 0 7005 0 1.4 0 0 4.5 7075 1.6 2.5 0 0 5.6 356.0 0 0.3 0 7 0

Environmental Impact, Recyclability

Stainless steel is known for its good recyclability. According to Napa Recycling, steel is the most recycled material in the world. It has distinct magnetic properties that make it an easy material to recover from the waste stream for recycling. In addition, the properties of steel remain unchanged no matter how many times the steel is recycled.

Even though steel is the most recycled material, aluminum is the most recyclable of all materials. As a matter of fact, discarded aluminum is more valuable than any other material in your recycling bin. Nearly 75% of all aluminum produced in the U.S. is still in use today because aluminum can be recycled over and over again in a true closed loop. To learn more about recycling aluminum, visit the Aluminum Association.

Different Applications of Aluminum vs Steel

Aluminum and steel are everywhere. If you look around at any given place, chances are you will see something containing one of these metals. Below are some common applications of stainless steel and aluminum.

Aluminum Applications

• Aluminum is common in the transportation industry because it is lightweight and corrosion resistant
  • Automotive
  • Train rails
  • Airplanes
  • Spaceships
• Aluminum is common in the electrical industry because of its conductivity, ductility, and low density.
  • Long distance power lines
• Aluminum is used in architecture for its malleability, high strength to weight ratio, and cost efficiency
  • Window frames
  • High-rise buildings (fun fact: the Empire State Building was one of the first structures to contain aluminum)
• Aluminum is common in household appliances because of its thermal conductivity
  • Dishwashers
  • Washers
  • Dryers
  • Refrigerators

Stainless Steel Applications

• Stainless steel is common in kitchen equipment due to its resistance to corrosion and heat
  • Kitchen sinks
  • Cutlery
  • Food prep tables

• You’ll find stainless steel in surgical tools and medical equipment due to its corrosion resistance
  • Forceps
  • Surgical implants
  • Scissors
• Stainless steel is also used in architecture because of its strength and durability, just in different applications
  • Bridges
  • Monuments and sculptures
  • Buildings
• Stainless steel is also used in the automotive industry due to its strength and heat resistance
  • Auto bodies
  • Rail cars
  • Engines

When comparing stainless steel vs aluminum, you see they both possess characteristics that make them popular materials for manufacturing. Knowing the differences between them helps you to know when to use aluminum vs stainless steel. For example, aluminum is used for electrical applications because it is conductive and lightweight while stainless steel is not. On the other hand, stainless steel is utilized for things like engines and processing equipment because of its strength, resistance to heat, and corrosion.

Aluminum and stainless steel are the two most useful materials available in the kitchen. The cookware, domestic appliances like microwave, refrigerators, ovens, etc either made of aluminum or stainless steel grades.

Stainless steel is replacing aluminum rapidly. Although aluminum has some major advantages like lightweight, rapid heat conduction, cheaper option, etc in some instances it is not safe. Aluminum cookware can cause toxicity as it can leech into food. It is not advisable to use it at high temperatures. But aluminum bake ware is famous for ovens. The heat conduction property of aluminum is superb.

Stainless steel cookware is quite trendy among various other cookwares. Stainless steel pots, pan, pressure cookers are stable at high-temperature cooking. These are strong and durable for a lifetime. It lasts for more than aluminum cookware. Importantly, stainless steel cookware does not react in food which ensures a safe healthy feature for long time use. It is corrosion and scratch resistant and has a silver shine. Stainless steel cookware is dishwasher safe.

Stainless steel appliances feature more durability and safety than aluminum. Yet, it is expensive too, but challenges for a lifetime.